TFxLabel autosize problem when in angle

Root › Technical support › Troubleshooting

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 14, 2019 at 2:20 am #38154
    JM-DG
    Participant

    Hi!

    I also have a problem with the TsLabelFx component.

    The label size is not calculated properly and part of the word is cut out (occurs in design time & run time) when the label has an angle = 90 or 270 and the shadow has a mode set to smNone (When there's a shadow the problem is not present). Of course, autosize is set to true.

    Here's a screenshot of the problem (the right side word: réverbération)

    Last letter is supposed to be a “n”.

    70efede190a4e4fafa7c6475eb662a47.png

    I've also attached a simple demo.

    Thank you for your time.

    February 14, 2019 at 2:27 am #59082
    JM-DG
    Participant

    Demo 🙂

    February 19, 2019 at 6:02 am #59106
    Support
    Keymaster

    Thank you for the demo, this issue will be solved in the nearest release.

    March 1, 2019 at 9:01 pm #59175
    JM-DG
    Participant
    'Support' wrote:

    Thank you for the demo, this issue will be solved in the nearest release.

    It doesn't seem to be fixed in version 14.17.

    March 5, 2019 at 6:26 am #59182
    Support
    Keymaster

    You are right. Sorry, more time was needed.

    This issue is solved now with big changes in the component code.

    You can wait few days or I can send you latest files for tests now, if you wish.

    March 5, 2019 at 1:37 pm #59195
    JM-DG
    Participant

    No problem, thank you. I will wait for the release. 🙂

    March 12, 2019 at 12:39 pm #59228
    JM-DG
    Participant
    'JM-DG' wrote:

    No problem, thank you. I will wait for the release. 🙂

    Woks perfectly in latest release v.14.18.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Root › Technical support › Troubleshooting